Very often on the inside of the pipes along which water passes, the formation of various deposits occurs. Their nature depends on the properties of water passing through the pipes and on the speed of its movement. To improve the sewer, you should put new pipes, a check valve on the sewage system and sometimes clean it.
As a result of the resulting deposits, the living section of the pipe is reduced, and, accordingly, its capacity also.
To prevent the development of microbial processes, it is necessary to support a certain speed of water, in which the precipitate on the pipes is not formed. It is also necessary to prevent stream turbulence so that oxygen does not produce from the water.
Conclusion: for the operation of the sewage without problems, it should be cleaned periodically.
Ways to clean the sewer.
By cleaning methods, you can highlight:
– mechanical,
– hydrodynamic,
– chemical,
– thermal.
Read more from these methods.
Mechanical cleaning.
This cleaning is carried out using appropriate equipment that removes deposits (sand, dense silt, small crushed stone) and hard -to -healing obstacles (blockages, large stones). In this case, chemical pollution is destroyed. (By just this is done with a cord)
Hydrodynamic cleaning.
The method is based on the pressure difference. High working pressure makes it possible to remove any type of pollution from the surface of the pipe. (With this way, I remembered the situation alone, when the chicken legs were stuck in the toilet, we simply put the hose on the crane, and its other end was inserted into the toilet and turned on hot water to the full))
Chemical cleaning.
Chemical washing is carried out to dissolve deposits of salt and organic nature.
Thermal cleaning.
Thermal flushing is a combination of cleaning with a stream of water under high pressure, and cleaning with water heated.