In our age of high technology, we write less by hand and use printouts more and more. Therefore, for many, the question is how to choose a good printer for use at home. This is not so difficult as it might seem at first glance. Although there are an infinite number of printers, all possible models and with different functionality, we will try to simplify the choice a little, dividing the printers into three main categories: jet, laser and matrix.
Matrix printers
In the recent past – the most common type of printers. The principle of its work is similar to the principle of operation of an ordinary printing machine. Microscopic needles are blows on the coloring tape, leaving a mark on paper. The higher the number of such needles, the better the seal is obtained. Of the advantages, it can be noted – cheap supplies. Of the shortcomings – low print quality and noise published during operation. It makes no sense to buy such a printer home, unless you are going to print on envelopes and ready -made paper forms not the best quality.
Inkjet printers
As follows from their name, the image is formed by the so -called spraying of paint on paper. Print quality is very good, including color. However, special paper is required, as well as the consumables themselves are very, very expensive.
Laser printers
The principle of operation of a laser printer is exactly the same as that of a copy apparatus with a drum and powder toner. Printing is always made in maximum resolution, and excellent quality is combined with very affordable consumables. True, the cost of the printer itself is not the cheapest, but over time it pays off the cost of consumables. In addition, cartridges for laser printers are perfectly subject to refueling. How to refuel the Q2612A cartridges, for example. As practice shows with this task, it is best to contact specialized centers and companies. In this case, you can be confident both as a seal, and that the newly seasoned cartridge will not harm your printer. Although, some lovers of needlework are trying to carry out this procedure on their own, but this is not always reasonable. This process is a time -consuming and inexperienced person can not always do everything as it should. Therefore, use the services of specially trained people and the result will always be “at the level”!